HYDRO BAN®

LATICRETE Hydro Ban is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.           

HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.

Key Features

  • Meets and exceeds the requirements of AS4858 and AS4654.1 for a Class 3 Membrane
  • Does not require the use of fabric**
  • Bonds directly to metal and PVC plumbing fixtures only
  • Thin; only 0.5 mm–0.8 mm thick when cured
  • Changes in colour from a light sage to an olive green when cured
  • Anti-fracture protection of up to 3 mm over shrinkage and other non-structural cracks
  • "Extra Heavy Service" rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
  • IAPMO approved
  • Contains antimicrobial product protection
  • Rapid drying for a faster time to tile
  • Lighter colour for ease of inspection
  • Safe—no solvents and non-flammable
  • Install tile, brick and stone directly onto membrane

* Refer to cautions section of data sheet for more information on curing

** For gaps 3 mm or less see TDS1003 for complete instructions

Additional Information

Item Number: 9255-0XXX-2

Warranties:

  • DS-1097 LATICRETE System Warranty

Product Data Sheets:

Safety Data Sheets:

Installation Information:

  • TDS1001 - Installing HYDRO BAN Over Rough Surfaces
  • TDS1003 - Installation Instructions for Australia
  • TDS1004 - Spraying HYDRO BAN

Approvals/Certifications:

Marketing Information:

  • DS-1013 - HYDRO BAN (Sell Sheet)
  • DS-1106 - Green Certified Low VOC Products (Sell Sheet)
  • DS-1107 - Antimicrobial Protection in LATICRETE Products (Sell Sheet)

 

 

 

 

HYDRO BAN®

LATICRETE Hydro Ban is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.           

HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.

Key Features

  • Meets and exceeds the requirements of AS4858 and AS4654.1 for a Class 3 Membrane
  • Does not require the use of fabric**
  • Bonds directly to metal and PVC plumbing fixtures only
  • Thin; only 0.5 mm–0.8 mm thick when cured
  • Changes in colour from a light sage to an olive green when cured
  • Anti-fracture protection of up to 3 mm over shrinkage and other non-structural cracks
  • "Extra Heavy Service" rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
  • IAPMO approved
  • Contains antimicrobial product protection
  • Rapid drying for a faster time to tile
  • Lighter colour for ease of inspection
  • Safe—no solvents and non-flammable
  • Install tile, brick and stone directly onto membrane

* Refer to cautions section of data sheet for more information on curing

** For gaps 3 mm or less see TDS1003 for complete instructions

Additional Information

Item Number: 9255-0XXX-2

Warranties:

  • DS-1097 LATICRETE System Warranty

Product Data Sheets:

Safety Data Sheets:

Installation Information:

  • TDS1001 - Installing HYDRO BAN Over Rough Surfaces
  • TDS1003 - Installation Instructions for Australia
  • TDS1004 - Spraying HYDRO BAN

Approvals/Certifications:

Marketing Information:

  • DS-1013 - HYDRO BAN (Sell Sheet)
  • DS-1106 - Green Certified Low VOC Products (Sell Sheet)
  • DS-1107 - Antimicrobial Protection in LATICRETE Products (Sell Sheet)

 

 

 

 

[RIGHTPANE]
© 2012 LATICRETE Australia Pty Ltd.   All trademarks shown are the intellectual properties of their respective owners.  Terms Of Use  Privacy Statement